FTP-User can login, but can’t see any directory-listing:
aka “Unable to retrieve directory-listing”
aka “Internet Explorer cannot display the webpage”
aka “Oops! Google Chrome could not connect to FTP.YOURHOST.COM”
this also appears in the Log-Watch for BulletProof FTP Server 2011 as 2012-01-31 13:12:33 – mmc  [22.214.171.124] – PASV 2012-01-31 13:12:33 – mmc  [126.96.36.199] – 227 Entering Passive Mode (12,13,14,15,156,119) 2012-01-31 13:12:34 – mmc  [188.8.131.52] – INFO: user disconnected gracefully. (00:00:01)
REASON: Stateful-Packet-Inspection (SPI) and Passive-Mode:
The first thing to do when setting up BulletProof FTP Server 2011 is to configure it to operate behind your NAT/Firewall (HOWTO).
This is called Passive-Mode (PASV) support and is a must for most installations. However many NAT/Firewalls have a “feature” called Stateful-Packet-Inspection or SPI (INFO) that sniffs the network-traffic for FTP packets and mangles the information in the packets to dynamically open ports on your firewall. Sadly, it almost always fails to correctly change the entire packet. In order to “help” SPI, it’s recommend to change the Static IP Address to the Listening IP address for your machine running BPFTP Server.
In order to better “cooperate” with SPI, it’s recommend that you try changing the Static IP Address under Management -> Settings -> NAT/Firewall to the Listening IP on the left side of the main-screen under Server Info.
BulletProof FTP Server supports the ability to create “Virtual Folders” for your ftp-users to access additional drives, folders and network-shares; allowing your ftp-users access to a wide variety of folder-locations on your local computer, as well as mounted-shares in your network.
Providing Access to Web-Server documents via FTP
Accessing the files on your home-computer from work
Allowing telecommuters to update company files, spreadsheets, etc from home
Facilitating the transfer of very large files over the internet (too big for email)
Trade files between friends and family using their web-browser
When you purchase our software, you are sent a license-code aka registration-code. This license-code is a secret set of letters and numbers which will turn the demo/trial version into the full version. This license-code is tied to the version of the product that was purchased and will only work in the version that purchased.
In other words, if you purchased BulletProof FTP Client 2009, the license-code you are sent will only work in Version 2009 of the product. It will not work in Version 2008 of the product, nor will it work in Version 2010 of the product.
Please Note: All orders come with 1-FREE-YEAR of supports and updates, this includes major updates and often times (depending on the release date of the next version) you’ll get the next full-version with this FREE year of support/updates. So, please search your email for anything from email@example.com as you may have another license-code.
You have two options….
1) If you do not want to upgrade to the latest version, then please go to our website and click one of the Download links for the product and scroll down to “Older Versions” and find the version that matches the license-code you purchased.
Please Note: Older versions do not have the latest changes needed to run on modern versions of Windows. Nor do they include updates and/or bug-fixes that were achieved in the latest version of the product.
2) You can upgrade to the latest version, which will renew the support and updates and you will be sent a new license-code. In addition, you could be eligible for a discount for being a previous customer. Please check the MEMBERS section of our website or Contact Us with the customer information for your previous order and we’ll locate the order and send you a discount coupon-code.
Yes!! You can certainly upgrade and retain all of the Users, Groups and Settings that you currently have defined in any version of BulletProof FTP Server.
In designing the latest version of BulletProof FTP Server, it has been a paramount concern that upgrades from a previous versions are supported 100% for our previous customers. This includes customers running versions: v2.21, v2.3, v184.108.40.206, v2.4, v2.5, v2010, v2011, any version!
The storage-format for the Users, Groups and Settings is a simple flat-text-file called an INI File. This file format has been around since the earliest days of Windows and we’ve found it to be extremely easy to maintain, edit and backup/restore. The only change over the years has been the location where this file is stored, see below for the location and file-name for these files: FAQ: Where does BPFTP Server store the Users, Groups and Settings?
NOTE: The original files will not be harmed in anyway and you can even run the previous and current version of the software on the same computer without them conflicting.
Same Computer: Migrating the Users, Groups and Settings from a previous version is very simple and automatically provided when the latest version of BulletProof FTP Server is installed and started for the first time on a machine that currently runs a previous version.
New Computer: If you are creating a new Windows machine to run the latest version of BulletProof FTP Server; and would like to migrate the Users, Groups and Settings from this previous machine, you would simply copy the *.INI files to location that the new Windows machine can access (USB drive, network share, emailed attachment, etc).
FAQ: Where does BPFTP Server store the Users, Groups and Settings?
The Users, Groups and Settings for BulletProof FTP Server are stored in simple flat-text-files called INI Files. These files have not changed over previous versions, however the location for these files has changed slightly to reflect Microsoft’s suggestions for security and reliability:
BulletProof FTP Server has the ability to serve files on your Mapped Network Drive via FTP. But you will need to add some special parameters to make sure that the credentials for the mapped drive are saved and the connection is toggled as persistent.
This is best done via the command-line (CLI) using the NET.EXE USE command.
Take the following example:
c:> %SystemRoot%\system32\net.exe use h: \\myserver\myshare /user:myusername /persistent:yes
In this example we are mapping drive-letter “H:” to a computer named “myserver” with a share-name of “myshare”, where the credentials needed to login to the machine are specified as “myusername” (if you were part of a domain, it would be “mydomain\myuser). The “/persistent:yes” instructs Windows to reconnect the drive at login.
Microsoft Windows, by default, disconnect network-drives after X minutes of inactivity. Remapping the drive is done quickly and usually without any interruption. However if you have any problems, it’s recommended that you increase the default 600 seconds (10 minutes) to a larger number: Mapped Drive Connection to Network Share May Be Lost
NOTE: This ONLY effects the OLDER version of BulletProof FTP Server 2011. This problem does not exist in the current version.
This week, we discovered the source of a problem with running BulletProof FTP Server 2011.1.0.71 (and prior) as a Windows System-Service and the default settings for User-Access-Control (UAC). User-Access-Control (UAC) was first-introduced in Windows Vista as a tool to help isolate programs from making unauthorized changes to the Windows Registry; and is now included by default in Windows 7, Server 2008 and R2.
User-Access-Control blocks and prevents some of the functionality in BulletProof FTP Server 2011.1.0.71 (and prior), specifically the code dealing with Windows System-Services. This includes the installation of the SERVICE and it’s internal communications to the SERVICE when running the GUI.
Bottom Line: In order to run BulletProof FTP Server 2011.1.0.71 (and prior) as a Windows System-Service, you will need to modify the User-Access-Control (UAC) and change it’s settings to “Never Notify”.
We understand this presents a security-risk in some environments and will be releasing an update in the coming days to address the problem.
Please see the detailed steps below for changing the settings in UAC, starting in the Windows Start -> Control Panel.
One could argue that UAC was a big reason for the universal opinion that Vista was a flop; but still other techies are fans, as it can help protect the computer (if you don’t always click Continue without thinking).
Faulting application bpftpserver-2011.exe, version 2011.1.0.71, time stamp 0x4e8f8103, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc000001d, fault offset 0x03094c99, process id 0x818, application start time 0x01cc9567a0e85aad
Technically, this patch prevents the loading of external DLL’s without a fully-qualified-path to the DLL. Unfortunately, we utilize a virtualized DLL that is loaded at program start that does not load a DLL-file on the system, so it can fail when KB2533623 is applied to this system.
Is KB2533623 installed on my installation of Windows?
Windows GUI: You can list all of the updates for your installation of Windows from the following location:
Windows CLI: Alternatively you can execute the following at a command-line:
C:\Users\myusername> wmic qfe list | find "2533623"
http://support.microsoft.com/?kbid=2533623 MYCOMPUTERNAME Update KB2533623 MYCOMPUTERNAME\myusername 7/15/2011
How do I uninstall KB2533623?
Windows GUI: You can uninstall individual updates from Microsoft by loading the following:
Windows CLI: If you are using Windows 2008 R2, you can then uninstall it from the command line using the WUSA.EXE command. (If you aren’t using Windows 2008 R2, you’ll need to use the above GUI method).
C:\Users\myusername> wusa /uninstall /kb:2533623